Product Specifications

GENERAL
 Frequency coverage (MHz) 136–174MHz
Number of channels 128 channels/8 zones
Type of emission 16K0F3E*/11K0F3E/8K50F3E/4K00F1E/F1D
Channel spacing 25*/12.5/6.25 kHz
Power supply requirement 7.5V DC nominal
Current drain:  TX   1.3A (High)
(approx.)         RX   400mA/100mA (Max. audio/Standby)
Antenna impedance 50Ω
Operating temperature range –30°C to +60°C; –22°F to +140°F (Radio specifications) Dimensions (W×H×D) (Projections not included) 53×120×37 mm; 2.09×4.72×1.46 in (With BP-232WP)
Weight (approx.) 340g; 12oz (With MB-94R,BP-232WP & antenna)

TRANSMITTER
Output power (at 7.5V DC) 5W, 2W, 1W (Hi, L2, L1)
Max. frequency deviation ±5.0/±2.5kHz (Wide/Narrow)
Frequency stability ±1.0ppm
Spurious emissions 75dB typ.
FM Hum and Noise 52/46dB typ. (W/N)
Audio harmonic distortion 1.0/2.0% typ. (AF 1kHz 40% deviation, W/N)
FSK error 2% typ.
Ext. microphone connector 3-conductor 2.5 (d) mm (1⁄10″)/2.2kΩ

RECEIVER
Sensitivity (Analog 12dB SINAD)   0.23µV typ
                (Digital 5% BER)            0.18µV typ.
Adjacent channel selectivity   77/71/58dB typ. (W/N/D)
Spurious response rejection   90dB typ.
Intermodulation rejection   75/75/70dB typ. (W/N/D)
Hum and noise                   48/42dB typ. (W/N)
Audio output power              1000mW typ. (Internal SP)
(at 5% distortion, 8Ω load)    400mW typ. (External SP)
Ext. speaker connector 2-conductor 3.5 (d) mm (1⁄8″)/8Ω

Measurements made in accordance with EIA/TIA-603.

All stated specifications are subject to change without notice or obligation. * 25kHz bandwidth is no longer available for FCC Part 90 licensees for USA versions. Ask your dealer if you need 25kHz bandwidth.

Applicable U.S. Military Specifications & IP Rating
Standard                                              MIL 810G
                                            Method                              Procedure
Low Pressure                         500.5                                   I, II
High Temperature                   501.5                                   I, II
Low Temperature                    502.5                                   I, II
Temperature Shock                503.5                                   I-C
Solar Radiation                       505.5                                   I
Rain Blowing/Drip                   506.5                                    I, III
Humidity                                507.5                                    II
Salt Fog                                 509.5                                      –
Dust Blowing                          510.5                                    I
Immersion                              512.5                                    I
Vibration                                 514.6                                   I
Shock                                    516.6                                    I, IV

Also meets equivalent MIL-STD-810-C, -D, -E and -F.

Ingress Protection Standard (IC-F3230DT/DS, F4230DT/DS with BP-232WP)
Dust & Water                 /              IP67  (Dust-tight and waterproof protection)